TRL型管線高剪切分散乳化泵概述
管線高剪切分散乳化泵是用于連續生產或循環處理精細物料的高性能設備，在狹窄空間的腔體內，裝有1—3組對偶咬合的多層定、轉子、轉子在馬達的驅動下高速旋轉產生強勁的軸向吸力將物料吸入腔體。在短的時間內對物料進行分散、剪切、乳化處理，粒徑分布范圍也顯著變窄。由此可制得精細的*穩定的產品。
工作腔內裝有三組定、轉子，工作腔內傳動軸采用懸臂式，彈性聯軸器將電機與軸承箱內的主軸聯接，提高傳動軸的運行質量，密封形式根據不同的工況來選擇。適用于中、大批量在線連續生產或循環處理生產工藝。出口壓力PN：≥ 0.6 Mpa
Multi-Frequency fluid mixers are used where two mutually insoluble liquids must be continuously mixed into a stable emulsion, or where solids in suspension must be dispersed as finely as possible in a viscous liquid..
管線式高剪切均質乳化機被用來在兩個相互不溶的液體必須連續混合成穩定的乳液，或在懸浮液中固體分散地必須盡可能在粘性液體中。
The multi-frequency liquid mixer comprises a series of opposed rotors and stators on a common axis. The rotors are fitted with milled teeth for low viscosity applications and with round studs for use with viscous fluids. Inside the fluid mixer, constantly changing areas of rapid flow and resistance subject the liquid to high frequency acceleration and deceleration. The resulting high energy shear forces result in effective dispersion and emulsification.
管線式高剪切均質乳化機包括一系列反對一個共同的軸的轉子和定子。轉子裝有銑齒低粘度的應用和圓釘用于粘性流體。賓得混合器內，不斷變化的領域的快速流動和阻力主體液高頻率的加速和減速。結果在有效的分散和乳化剪切力產生高能量。
